Homeowners call for assistance from a plumber about once every three years, according to consumer research. Sometimes they need repair work from a plumber in Papillion, NE and others times they want an upgrade to their current system. A repair might require replacing a leaky faucet, for instance.
In some cases, just replacing a washer will do the trick, but many faucets cannot be repaired this way. An upgrade might involve adding a whole-house water filter to improve the quality of the tap water. What are some other common reasons people call a plumber?
Slow or Stopped-Up Drains
Water draining too slowly down the sink pipe is a problem that tends to get worse over time. Often, adding a chemical-based drain cleaner doesn’t work very well if at all. If the clog becomes large enough, the water will stop draining altogether and simply stand in the sink.
A plumber in Papillion, NE uses specialized tools to eliminate these clogs that are usually caused by substances like hair, lint, food particles and grease. They may need to take the pipe under the sink apart and manually clear out the offending material that way. The problem can be prevented in the future by keeping a strainer over the drain.
Running Toilets
Toilets that continue running after being flushed can waste a substantial amount of water. In warm, humid weather, the ongoing influx of cold water in the tank also results in condensation on the outside that can drip onto the floor. Mildew can gradually develop on the bottom and back of the tank where it isn’t noticeable and probably isn’t being cleaned off regularly.
Usually, this is an intermittent problem and people tend to delay doing anything about it. In the meantime, they have the inconvenience of waking up in the night because a guest flushed a toilet that has continued to run. They arrive home after a weekend away only to discover the bathroom floor is saturated because the toilet has been running the entire time.
Scheduling an appointment with a company such as Jeff Mumm Plumbing Omaha, NE leads to prompt adjustment of equipment in the tank or replacement of parts that are too worn to function properly.
